Shark UV610 Bedienungsanleitung Seite 2

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 6
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 1
ASSEMBLING YOUR CORDLESS SWEEPER
Before you start:
Your Cordless Sweeper will require very little assembly. You should remove it
from the carton and familiarize yourself with all the components listed per the
exploded view drawing (pg.2) This will help you in the assembly and operation of
your cordless sweeper.
CORDLESS SWEEPER
Model UV610
7.2 Volt DC
1. Insert the Edging Tool into the "square" hole under the bottom of the sweeper power
head. Gently but firmly push until the edging tool locks into place.(See fig. 1)
2. Insert the lower handle - small end - into the sweeper power head. Push until firmly
in place.(Fig. 2)
3. Assemble the metal extension handles by pushing the plastic insert into the mating
metal tube. Push until only small portion of insert is visible or you cannot press any
farther into the tubing. Push the handle assembly into the upper handle.(Fig. 3)
NOTE: One metal extension tube has a different plastic insert. This tube should
be on the bottom of the handle.
Insert the handle assembly into the lower handle so that the “tab’ on the plastic
insert snaps into the open slot on the lower handle. (Fig. 3a)
Insert into Lower
Handle.
Lower Handle
Fig.4a
Fig. 1
Fig. 2
Fig. 3a
Fig. 3
8. Charging Jack
9. Lower Handle
10. Metal Extension Handles
11. Upper Handle
12. Charging Adapter
(TechWorld AD-0920-UL
rated output DC 9V, 200mA.)
13. Gear Box
1. Sweeper Power Head
2. On / Off Switch
3. Charging Light Indicator
4. Dust Cup (Container)
5. Rotating Brush
6. Transparent Brush Cover
7. Edging Tool
4. Place the handle into the upward storage position.
5. Plug the charging adapter into the sweeper power head charging jack. Plug
the charging adapter cord into a standard electrical outlet (120V~,60Hz.)
NOTE: Cordless Sweeper Model UV610 is shipped with the
batteries uncharged. Charging of the unit for 16-20
hours prior to first use is required.
3
2
Seitenansicht 1
1 2 3 4 5 6

Kommentare zu diesen Handbüchern

Keine Kommentare