Shark NV350 series Anleitung zur Fehlerbehebung PDF herunterladen (Seite 5)

8 TOLL FREE: 1-800-418-0934 9www.sharkclean.com

TO USE:

1 Rotate the cord release to quickly release the

power cord.

2 Secure the power cord in the cord hook (a).

(Fig. 12)

= Brush Roll ON

= Bare Floor

= OFF

3 Press the On/Off switch (b) to the “I” position to

vacuum bare ﬂoors (straight suction only) or to the

“II” position to engage the motorized ﬂoor brush

(for vacuuming carpets and rugs). (Fig. 12)

IMPORTANT: The motorized brush indicator light

brush is on, or red if there is a blockage or jam.

(Fig. 12) This feature is designed to protect your

Lifetime Belt that powers your motorized ﬂoor

brush. See Checking for Blockages on page 15.

4 Gently press the ﬂoor nozzle down with your foot

while you grasp the handle and tilt it back towards

you. (Fig. 13)

NOTE: The rotating brush on the motorized

ﬂoor brush will not spin unless the nozzle is ﬂat

against the ﬂoor and the handle is tilted back.

5 Due to the huge suction power of this

vacuum, it may become necessary at

times to adjust the suction release (d)

on the handle. (Fig. 12) If the vacuum

seems difﬁcult to push or pull or if

it is lifting up area rugs, adjust the

suction release by rotating the collar 90°

counterclockwise to open the valve. Rotate

the collar clockwise to close the valve when

you need high suction and for vacuuming

ﬂoors.

6 Empty dust cup after vacuuming and periodically

during use when it appears full. (See

“Maintenance” section for instructions.)

7 When you are ﬁnished vacuuming, turn the

vacuum off.

Mode 1: Upright Vac

To reduce the risk of electric shock, unplug the unit before assembling, adding or removing attachments or

converting modes.

WARNING: The On/Off switch is on the top of the detachable canister. Always ensure the power is OFF

(“O” position) before plugging and unplugging.

Fig. 13

English

TO ASSEMBLE:

1 Place the ﬂoor nozzle on a level surface.

2 Align the tube of the ﬂoor nozzle with the tube on

the detachable canister and lower until you hear

the two pieces click into place. (Fig. 8)

When attaching the motorized ﬂoor brush, ensure

that the latching mechanism is fully locked in place

to ensure electrical connection has been made.

NOTE: To change ﬂoor nozzles (models NV350,

NV350A & NV350E only) press the red release

button (a) on the side of the detachable canister,

gently hold the nozzle to the ﬂoor with your foot

and pull the detachable canister up. (Fig. 9)

3 Attach the end of the extension wand to the tube

on the back of the detachable canister until it

clicks into place. (Fig. 10)

4 Slide the accessory holder (a) positioned opposite

the upper cord wrap, over the extension wand.

Align the tab with the groove and push down.

(Fig. 11)

5 Push the handle (b) onto the top of the extension

wand until you hear it click into place. (Fig. 11)

6 Insert the end of the stretch hose (c) into the

connector on the back of the detachable canister.

(Fig. 11)

7 Store the dusting brush (d) and the crevice tool

(e) on the mounts of the accessory holder.

(Fig. 11)

Fig. 8 Fig. 9

Fig. 10 Fig. 11

Upper

Cord

Storage

Wrap

Fig. 12

Cord

Hook

Suction

Release Collar

Release suction

for easier push &

pull on high pile

carpets and area

rugs.

NV350WC_26_IM_ENG_FRE_100910.indd 8-9 10-09-14 2:39 PM

1 2 3 4 5 6 7 8 9 10 ... 20 21

Kommentare zu diesen Handbüchern

Keine Kommentare

Shark NV350 series Anleitung zur Fehlerbehebung Seite 5

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Staubsauger Shark NV350 series