Shark EP709 Bedienungsanleitung PDF herunterladen

Item # XSG709

for Model EP709

10 Paper Bags – 1 Pre-Motor Filter – 1 Post Motor Filter

Item # XSG709

for Model EP709

10 Paper Bags – 1 Pre-Motor Filter – 1 Post Motor Filter

Warning: To reduce the risk of electric shock, the power cord

must be disconnected before changing the bag or

performing maintenance/trouble shooting checks.

Warning: To reduce the risk of electric shock, the power cord

must be disconnected before changing the bag or

performing maintenance/trouble shooting checks.

Replacing the Dust Bag

1. To open main unit,

press the storage

compartment release

button to unlock and lift

the cover. (Fig. 1)

Note Vacuuming new carpet or carpet with

fine powders may clog the dust bag, so

check the bag more often. Never operate

without dust bag in place.

2. Remove the old dust bag by pushing the

paper bag holder towards the rear of the

unit and then pull up on the cardboard

collar. Dispose of paper bags

. Never

reuse Paper Bags.

3. To insert a new dust bag slide the

cardboard collar end with the slot into the

matching slot on the holder (a). Cardboard

should be behind the (2) two securing tabs

on holder. Press the paper bag holder (b)

toward the front of the unit and make sure

that the paper bag is locked in place.

(Fig. 2)

4. Close storage compartment cover.

Warning: Before closing main unit, make

certain that paper bag is well inside the

compartment and does not get caught between

the hinges when closing the cover.

Fig. 1

Fig. 2

Paper bag

holder

b) Push in

a) Cardboard

insert

Changing the Pre-Motor Filter

The pre-motor filter is located inside the

storage compartment behind the dust bag.

(Fig. 3)

• The pre-motor filter should be cleaned at

least twice a year or when it becomes

visibly soiled.

• Always operate the cleaner with the filter

installed.

• Disconnect from electrical outlet before

cleaning the filter.

• Do not use a washing machine to rinse the

filter.

• Do not use a hair dryer to dry it.

• Always allow 24 hours to air dry.

1. Press the storage compartment release

button and open the cover.

2. Remove the paper bag from the unit.

3. Pull the pre-motor filter assembly out of

the unit.

4. Remove the pre-motor filter from the

filter grill.

5. Rinse the pre-motor filter in lukewarm

water and let the pre-motor filter air dry

for 24 hours until it is completely dry.

(Fig. 4)

6. Replace the pre-motor filter into the filter

grill and replace back into the unit.

7. Replace the dust bag and close the

storage compartment cover.

Pre-motor

filter

Fig. 3

Fig. 4

Replacing the Dust Bag

1. To open main unit,

press the storage

compartment release

button to unlock and lift

the cover. (Fig. 1)

Note Vacuuming new carpet or carpet with

fine powders may clog the dust bag, so

check the bag more often. Never operate

without dust bag in place.

2. Remove the old dust bag by pushing the

paper bag holder towards the rear of the

unit and then pull up on the cardboard

collar. Dispose of paper bags

. Never

reuse Paper Bags.

3. To insert a new dust bag slide the

cardboard collar end with the slot into the

matching slot on the holder (a). Cardboard

should be behind the (2) two securing tabs

on holder. Press the paper bag holder (b)

toward the front of the unit and make sure

that the paper bag is locked in place.

(Fig. 2)

4. Close storage compartment cover.

Warning: Before closing main unit, make

certain that paper bag is well inside the

compartment and does not get caught between

the hinges when closing the cover.

Fig. 1

Fig. 2

Paper bag

holder

b) Push in

a) Cardboard

insert

Changing the Pre-Motor Filter

The pre-motor filter is located inside the

storage compartment behind the dust bag.

(Fig. 3)

• The pre-motor filter should be cleaned at

least twice a year or when it becomes

visibly soiled.

• Always operate the cleaner with the filter

installed.

• Disconnect from electrical outlet before

cleaning the filter.

• Do not use a washing machine to rinse the

filter.

• Do not use a hair dryer to dry it.

• Always allow 24 hours to air dry.

1. Press the storage compartment release

button and open the cover.

2. Remove the paper bag from the unit.

3. Pull the pre-motor filter assembly out of

the unit.

4. Remove the pre-motor filter from the

filter grill.

5. Rinse the pre-motor filter in lukewarm

water and let the pre-motor filter air dry

for 24 hours until it is completely dry.

(Fig. 4)

6. Replace the pre-motor filter into the filter

grill and replace back into the unit.

7. Replace the dust bag and close the

storage compartment cover.

Pre-motor

filter

Fig. 3

Fig. 4

USA: EURO-PRO Operating LLC Canada: EURO-PRO Operating LLC

94 Main Mill Street, Door 16 4400 Bois Franc

Plattsburgh, NY 12901 St. Laurent, QC H4S 1A7

Tel.: 1 (866) 98SHARK

www.sharkvac.com

Rev. 06/04

Printed in China

USA: EURO-PRO Operating LLC Canada: EURO-PRO Operating LLC

94 Main Mill Street, Door 16 4400 Bois Franc

Plattsburgh, NY 12901 St. Laurent, QC H4S 1A7

Tel.: 1 (866) 98SHARK

www.sharkvac.com

Rev. 06/04

Printed in China

1 2

Inhaltsverzeichnis

Seite 1 - Item # XSG709

Item # XSG709for Model EP70910 Paper Bags – 1 Pre-Motor Filter – 1 Post Motor FilterItem # XSG709for Model EP70910 Paper Bags – 1 Pre-Motor Filter – 1

Seite 2 - Changing the Post Motor

Changing the Post Motor Filter2. Remove the post motor filter from the filter grill. (Fig. 6)3. Rinse the post motor filter in lukewarm water and let

Kommentare zu diesen Handbüchern

Keine Kommentare

Shark EP709 Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Staubsauger Shark EP709 herunter. Shark EP709 User Manual Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Staubsauger Shark EP709